Part Number Hot Search : 
N4H11 KE39A LTC1392 1040C LH002 RMPA2 IL358D KE220
Product Description
Full Text Search
 

To Download PB-CMM2308-AJ-0000 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 800-2700 MHz High Dynamic Range Amplifier
December 2007 - Rev 29-Dec-07
CMM2308-AJ Features
+17 dBm Output Power <2.2 dB Noise Figure Low Current: 70 mA, Typ. Single +3V to +6V Supply DC Blocked >2:1 VSWR Low-Cost SOIC-8 Plastic Package
Functional Block Diagram
Vd 1 GND 2 RF IN GND 3 4 8 GND 7 GND 6 RF OUT 5 GND
Applications
Power Amplifier Drivers PCS Medium PowerAmplifiers Medium PowerWLANs Base Station Receivers
Absolute Maximum Ratings
Drain Voltage (+Vd) Drain Current (Id) RF Input Power Power Dissipation Thermal Resistance Storage Temperature Operating Temperature Channel Temperature Soldering Temperature
+7 V 150 mA 15 dBm 1.0 W 55 C/W -65 C to +150 C -40 C to +80 C 175 C 260 C for 5 Sec
Description
The Mimix CMM2308 is a high dynamic range, pin-compatible, second source for the TriQuint(R) 9132 and the Mini-Circuits(R) VNA. Providing comparable gain and lower noise figure than either of the existing standard amplifiers at 25% less drain current, the CMM2308 is an excellent choice for power sensitive applications, while delivering more design margin. Packaged in a low-cost surface mount SOIC-8 package, the CMM2308 will drop into existing designs and offers improved features and performance.
Recommended Operating Conditions
Parameter Typ Units Parameter Typ Units
Drain Voltage (+Vd )
3.0 to 6.0
Volts
Operating Temperature (PC Board)
-40 to +70
C
Electrical Characteristics
Parameter
The following specifications are guaranteed at room temperature with drain voltage (+Vd ) = 5.0 V 5% at 2.5 GHz.
Condition Min Typ Max Units
Frequency Range Small Signal Gain N oi se F i gure Power O utput @ 1 dB Compression Output 3rd Order Intercept Input Return Loss Output Return Loss DC Supply Current Supply Voltage
800 17.5 1. 8 to 2. 5 G H z 15. 5
2700 19.0 2. 2 17. 0 27 10 10 70 5
3
80 6
MHz dB dB dB m dBm dB dB mA V
TriQuint and Mini-Circuits are trademarks of their respective corporations.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
800-2700 MHz High Dynamic Range Amplifier
December 2007 - Rev 29-Dec-07
CMM2308-AJ Connection Diagram and Pin Description
Vd 1 GND 2 RF IN GND 3 4 8 GND 7 GND 6 RF OUT 5 GND Pin # 1 2 3 4 5 6 7 8 Name +V d GND RF IN GND GND RF OUT GND GND Description Drain voltage. Connect to positive supply Ground RF input (Internally DC blocked) Ground Ground RF output (Internally DC blocked) Ground Ground
Typical Performance
The following typical performance parameters were tested in the test circuit shown at room temperature and with a drain voltage (+Vd) = 5 V, unless otherwise specified.
Gain vs Frequency vs Vd
29 25
Test Circuit Diagram
1 +5V 0.01F RF IN 2 3 4 8 7 6 5 RF OUT
Gain (dB)
21 17 13 9 500 1000 1500 2000 Frequency (MHz) 2500 3V 4V 5V 6V 3000
Gain vs Frequency vs Temperature @ 5V
29 25 28 26
Gain vs Vd vs Temperature @ 1.8 GHz
Gain (dB)
21 17 13 9 800 900 -20 C 0 C +25 C +70 C 1500 1800 2000 Frequency (MHz) 2400 2500
Gain (dB)
24 22 20 18 3 4 5 Supply Voltage (Vd) 6 -20 C 0 C +25 C +70 C
Power Output (P-1) vs Frequency vs Temperature @ 5V Power Output (P-1) (dBm) Power Output (P-1) (dBm)
21 20 19 18 17 16 800 900 -20 C 0 C +25 C +70 C 24 21 18 15 12
Power Output (P-1) vs Frequency vs Vd @ 25 C
3V 5V 6V
1500 1800 2000 Frequency (MHz)
2400 2500
9 800 900
1500 1800 2000 Frequency (MHz)
2400 2500
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
800-2700 MHz High Dynamic Range Amplifier
December 2007 - Rev 29-Dec-07
CMM2308-AJ Typical Performance (cont.)
Noise Figure vs Frequency vs Vd @ 25 C
3.25 30 27 3.00 2.75 2.50 2.25 2.00 1.75 800 900 3V 5V 6V 1500 1800 2000 Frequency (MHz) 24002500
OIP3 vs Frequency vs Vd @ 25 C
Noise Figure (dB)
OIP3
24 21 18 15 800 900 3V 5V 6V 1500 1800 2000 Frequency (MHz) 2400 2500
Noise Figure vs Frequency vs Temperature @ 5V
3.25 30 27 2.75 2.75 2.50 +25 C 2.25 2.00 1.75 800 900 1500 1800 2000 Frequency (MHz) -20 C 24002500 +70 C
OIP3 vs Frequency vs Temperature @ 5V
Noise Figure (dB)
OIP3
24 21 18 15 800 900 -20 C 0 C +25 C +70 C 1500 1800 2000 Frequency (MHz) 2400 2500
S11 vs Frequency vs Vd
0 0
S22 vs Frequency vs Vd
-8 -12 -16 -20 500 3V 4V 5V 6V 1000 1500 2000 Frequency (MHz) 2500 3000
Output RL (S22)
-4
Input RL (S11)
-4 -8 -12 -16 -20 500 3V 4V 5V 6V 1000 1500 2000 Frequency (MHz) 2500 3000
Power In vs Power Out & Efficiency
25 Vd = 4.8 V & Frequency = 1.88 GHz 30
S12 vs Frequency vs Vd
-15
Reverse Gain (S22)
Power Out (dBm)
Power Out 15 10 Efficiency 5 0 -20 -8 Power In (dBm) -2 4 6 0 -14 18 12
Efficiency (%)
20
24
-25 -35 -45 -55 -65 500 3V 4V 5V 6V 1000 1500 2000 Frequency (MHz) 2500 3000
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
800-2700 MHz High Dynamic Range Amplifier
December 2007 - Rev 29-Dec-07
CMM2308-AJ
Adjacent Channel Power
Test Configuration and Evaluation
Mimix tests the CMM2308 on an FR4 PC test board. FR4 was chosen for its low loss characteristics at frequencies up to 2.5 GHz. Plated through hole connections from the top of the board to the backside ground plane minimizes inductance in the ground connections. These through hole connections are as close as possible to each ground pin. For evaluation purposes Mimix offers a prototype evaluation board (PB-CMM2308-AJ) for the CMM2308. Please call the factory or a local representative for more information.
/4 DQPSK Modulation, Vd = 4.8 V
Handling Precaution
Microwave devices are sensitive to electrostatic discharge. Proper precautions should be taken to avoid ESD damage.
Physical Dimensions
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
800-2700 MHz High Dynamic Range Amplifier
December 2007 - Rev 29-Dec-07
CMM2308-AJ Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes.
Ordering Information
The CMM2308 is available in a surface mount SOIC-8 plastic package. Part Number for Ordering CMM2308-AJ-0G00 CMM2308-AJ-0G0T PB-CMM2308-AJ-0000 Package Matte Tin finished RoHS compliant SOIC-8 package in bulk quantity Matte Tin finished RoHS compliant SOIC-8 package in tape and reel Evaluation Board
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.


▲Up To Search▲   

 
Price & Availability of PB-CMM2308-AJ-0000

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X